Roura provides caster and wheel sets in a variety of combinations to fit your specific needs. A complete set includes two swivel rear casters and two rigid front casters. All swivel wheels shown are mounted on kingpinless swivel rigs. The following information will allow you to choose the right type, size and rig combination. See Parts for Wheel Brakes and Floor Locks.

Ductile Iron Wheel

ductile

Our most popular caster. For use on rough floors with metal chips and debris. Easy rolling, crowned wheel face for easy turning. Available on models up through 680 and capacities up to 5000#. Semi-Steel is substituted for Ductile Iron for sizes 4″ x 2″, 6″ x 2″, and 10″ x 3″. 10 inch wheels are capable of withstanding 8000# loads per set.

Sizes: 8" x 2"

Spec Sheet: Ductile Iron Wheel

Spec Sheet: Semi-Steel Wheel

Polyurethane Wheel

polyurethane

A quiet rolling wheel with a molded-on polyurethane tread on a steel core. Non-marking, resists oil, water, grease, and most solvents. Available on models up through 680 and capacities up to 4800# for 8″ wheels and 8000# for 10″ wheels.

Sizes: 4" x 2", 6" x 2", 8" x 2", 10" x 3"

Spec Sheet: Polyurethane Wheel

Phenolic Wheel

phenolic

An easy rolling wheel, quieter than steel, non-marking and sparkproof. Resistant to oil, water, and grease. Excellent floor protection and can be used on smooth or rough floors. Available on models up through 680 and capacities up to 4000# per set.

Sizes: 4" x 2", 6" x 2", 8" x 2"

Spec Sheet: Phenolic Wheel

Polyolefin Wheel

polyolefin

An easy rolling, non-marking wheel with high shock and impact tolerance and good resistance to most chemicals. Can be used on smooth or rough floors. Available on models up through 680 and capacities up to 3600# per set.

Sizes: 4" x 2", 6" x 2", 8" x 2"

Spec Sheet: Polyolefin Wheel

Rubber Tired Wheel

rubber

Cushion rubber tread vulcanized to a cast iron center. Quiet rolling and shock absorbing. For use with light hoppers on smooth floors with light loads up to 2400# for 8″, and 4000# for 10″ wheels. Will leave tire marks on floors.

Sizes: 4" x 2", 6" x 2", 8" x 2", 10" x 3"

Spec Sheet: Rubber Tired Wheel

Removable Caster Pad

removable

The removable caster pad provides a means for easy removal and attachment of Roura casters. Manufactured of heavy gauge steel, these pads have a positive steel-enclosure that allows the caster mounting plate to slide directly into the pad. Once firmly in place, securing the nut to the bolt, keeps the caster securely in place. Simply unfasten the nut from the bolt and slide the caster from its bracket when removing the caster.

The advantage to the removable caster pad is the minimal amount of time to replace a damaged caster using a simple hand tool without any modification to the equipment. On-site re-installation of Roura casters has never been easier. This feature is available on all standard base models (excludes heavy-duty bases).

Sizes: